High thermal resistance graphite coating spray for casting- and measuring-tools in aluminium foundries . Volume 500 ml.
High thermal resistance coating for casting- and measuring-tools in aluminium foundries.
Sample ladle for taking samples of liquid non-ferrous metals. Available in a range of types, sizes and appropriate coating.
Sample crucibles for our VAC-TEST devices.
Tongs for crucible of VAC-TEST and Hydrogen-Analyser.
Cooling grid for VAC-TEST and Thermo-Analysis devices.
Ingot - tongs with separate bottom, made of high temperature resistant steel to produce "PILZ"-Samples according to international standard for spectral analysis.
2-piece ingot with insulated handle. Made of highconducting Cu-alloy for rapid and direction-controlled solidification.
Ladle rest for sample ladles of VAC-TEST devices.
Strip printer for VAC-TEST terminals.
Spare temperature sensor for Thermo-Analysis devices.
Ceramic sleeves for protection of the temperature sensor.
Ceramic sample moulds for our Thermo-Analysis devices. Made of heat-resistant ceramic.
Mould holder for TA ceramic sample moulds (TA-1702).
Device for cooling sample ingots down to room temperature, in order to stabilise the sampling conditions
Melt-Clean rotors are individually adapted to the respective treatment process. The rotor geometry, number of revolutions and position in the melt are decisive factors in this regard.
Melt-Clean rotor shafts are individually adapted to the respective treatment process and therefore vary in length.
Melt-Clean dammplates are individually adapted to the respective treatment process and therefore vary in length.
Tools for cleaning the melt surface. (Skimming of dross with a low Al content) Available in different types, sizes and materials with appropriate coating.
Surface probe for temperature measurement of moulds, tools, furnace walls, etc. Complete with handle, AGL cable and plug (Ni-Cr-Ni).
Insert probe for temperature measurement of aluminium melts. Complete with handle, AGL cable and plug (Ni-Cr-Ni).
Insert lance for temperature measurement of aluminium melts. Complete with AGL cable and plug (Ni-Cr-Ni).
Spare sensor for the insert lance TF920HL.
Sleeve thermocouple with plug (Ni-Cr-Ni).
Spare temperature sensor for Hydrogen-Analyser devices.
Sample crucibles for our Hydrogen-Analyser devices.
Optional tool rack extension for Hydrogen-Analyser devices.
Im Fisserhook 3 - 5
D - 46395 Bocholt
tel +49 (0)2871 60 26
Plot No. 318, Kashipura Sarar Road, Near Por GIDC
Village Kashipura, Dist. Vadodara – 391243, India
tel.: +91 75673 21687
cell: +91 97277 19518