MC750 - Melt-Clean Impeller

The IDECO Melt-Clean Impeller System is used for cleaning aluminium. The impeller cleans the melt and removes the existing oxides. The dissolved hydrogen content is also regulated in order to reduce the pore potential; this enables the production of pore-free castings. We offer a wide range of optional solutions for supplementary process documentation.

Fast and effective cleaning of the aluminium melt by means of the rotor/impeller principle
Welded stand anchored to the concrete floor or wall
Easy moving of the impeller system from furnace to furnace
Treatment in furnaces or transport ladles with a crucible volume of 100kg to approx. 3,000kg
Design of the trolley and boom length according to customer requirements
Lockable treatment and service positions
Long service life of graphite components thanks to double special impregnation and subsequent drying - Rotor shaft (impeller shaft), rotor (impeller), dammplate (baffle plate)
Several program options, freely definable and adjustable to customer requirements
Automatic addition of treatment agents as granulate by means of a screw conveyor from a storage tank (manufacturer-independent)
Forming gas module for "gassing" the melt with different concentrations.
Automated treatment up to the desired hydrogen value / real-time hydrogen measurement possible with integrated Hycal 100.
See "Options" for further options available

Welded stand anchored to the concrete floor or wall
Hardened linear roller trolley - customised
Powerful trolley drive with position sensing for setting the optimum immersion depth
Smooth-running horizontal trolley for easy movement of the impeller system from furnace to furnace
Position lock for secure locking of the system
Lifting link chain according to DIN
Carriage with closed refractory energy supply system
Customised boom length
Enclosed rotor shaft drive with double belt and temperature-resistant, maintenance-friendly SKF bearings
Standard coupling system MC275CO for friction-locked, gas-tight mounting of the rotor shaft (manufacturer-independent)
Customised graphite components - rotor shaft (impeller shaft), rotor (impeller), dammplate (baffle plate)
Control cabinet - PLC control with clear 7" comfort touch panel, operating status display, service mode and all necessary emergency functions
External control cabinet - control mounted on an external stand
Program menu freely adjustable by the customer (program name, treatment time, speed etc. / module dependent)
Possible input prompt for furnace and batch numbers
System access rights adjustable - operator, administrator / master / maintenance
Automatic inert gas pressure control
Flow control
Speed control of rotor drive
Automatic flushing of the rotor shaft and rotor
Network interface
CE conformity
Tested according to DGUV provisions
See "Options" for further options available

We individually manufacture each Melt-Clean impeller for the customer. A number of system modules for complementing your system can be found in the following. If you require any further technical additions, please do not hesitate to contact us.

Networking - treatment data can be made available to the IDECO QS-Master software or on the company's internal network
Control station - possible to connect to the production control station for controlling and monitoring the Melt-Clean impeller
MES connection - possible to connect to the company's internal MES system
Temperature acquisition - temperature measurement for each treatment with hand lance / min. & max. temperature adjustable / with visualisation of the limit ranges red/ green
External temperature display - complete with visualisation of the limit ranges red/ green
Automatic addition of treatment agents as granulate by means of a screw conveyor from a storage tank (manufacturer-independent). Suitable for installation as a single or DUO system
Digital flow control
Forming gas operation - additional module for automatic gassing of the melt with forming gas. The function is integrated into the automatic treatment sequence
Hydrogen measurement - automated "Hycal 100" hydrogen measurement - treatment possible up to the desired hydrogen value/ real-time hydrogen measurement during operation
RFID scan - reading of the furnace or crucible identifiers
EKS system - user authorisation via electronic key system
Visualisation of treatment parameters on large 12" or 15" panel display
Signal horn - for acoustic signal of the end of treatment
Protective hood - for covering the melt during treatment

Design Stationary and moveable Melt-Clean Impeller System produced from a powder-coated steel structure and anodised aluminium cladding.
Dimensions depending on system format
Weight depending on system format
Power 3N~ 400V / 50-60Hz; 3-phase + PE + N, 16A
Inert gas Nitrogen (N2) or argon (Ar) - min. 3.0 bar, quality = >4.0
Interfaces Network RJ45

We provide a 24-month warranty. The prerequisite for this is annual servicing by IDECO GmbH. (12-month warranty with 3-shift operation)