TC130RP Digital Thermometer
The TC130RP is a digital thermometer for performing measurements with Ni-Cr-Ni surface or insert probes. The recommended probes are characterised by a rapid response time of just a few seconds.
- Measuring range: -50 to +1300°C / -58 to +2000°F
- Rate of measurement: 2.5 measurements / sec.
- Resolution: 0.1°C or °F / 1.0 °C or °F
- Socket for connecting a K-type temperature sensor
- 3.5-digit liquid crystal display (LCD)
- Possible to switch between °C and °F
- Possible to switch the resolution between 0.1° and 1.0°
- "MAX" button for logging the maximum value
- "HOLD" button for holding a measured value
- Rubber holster and support bracket
Usable temperature sensors:
- Surface probe OF135HP
- Insert probe TF135HP
- Insert probe TF800HP
- Insert lance TF920HL
- Spare sensor TF203LK for TF920HL
Battery supply: 1 x 9V block battery
Power consumption: approx. DC 2.8mA (typical)
Operating temperature: 0 to 50°C
Storage temperature: -20°C to +60°C
Dimensions: W:71 x L:148 x H:36 mm
Weight: approx. 200g (including battery)
We provide a 24-month warranty. The prerequisite for this is annual servicing by IDECO GmbH. (12-month warranty with 3-shift operation)
- Digital thermometer with battery
